Crate Engines
homecontactordering and shippingmediain the press
 
 
crate engine online store
 
   

383 Chevy Stroker Crate Engine With 500 HP

Best Of The Best Priced To Sell

 

* Engine Shown With Optional Pulley Kit*

 

Extreme Street/Strip Power Plant

383 500HP Dyno Sheet

Chevy 383 stroker with 500 HP Hydraulic roller fully forged  bottom end engine combination. This engine can be custom designed to tailor to your specific needs. When we designed this engine combination we had the weekend racer in mind who can drive to the strip and back home. We can also custom paint your engine to match your vehicle at your request. We are a dealer for March Performance serpentine belt systems if you choose them as your pulley manufacture.  We can also assist you in choosing the proper performance street/strip transmission and stall speed converter combination for your vehicle and have it shipped directly to you as your engine is being built.

 

See Below The Quality Of Parts We Use In Our Engines

Short Block Assembly:
  • Fully machined seasoned 4 bolt main block
  • Block painted with 3 coats of high temp ceramic engine paint customers choice of color (have your engine custom painted to match your vehicle for an additional $300)
  • Eagle 4340 forged steel crankshaft 3.750 stroke
  • Eagle H-Beam connecting rods with ARP bolts
  • High performance pistons (Speed-Pro, Keith Black, SRP, or Mahle)
  • Clevite P Series rod and main bearing
  • Performance rings hand filed to match application
  • ARP main bolts
Fully Dressed Turn-Key Crate Engine Assembly:
  • All the above plus the following:
  • Comp Cams custom ground hydraulic roller camshaft
  • Hydraulic roller lifters
  • Three piece double roller timing set
  • Pro-Competition aluminum performance cylinder heads with 2.02/1.60 valves
  • 7/16 Screw in studs and hardened guide plates
  • Manley chrome moly push rods
  • Performance roller rockers
  • Melling high volume oil pump and screen
  • Chrome oil pan
  • Chrome dipstick and tube
  • Chrome timing cover
  • Performance balancer
  • Fel-Pro gaskets
  • Edelbrock Victor Jr. intake manifold
  • Chrome thermostat housing
  • Holley/AED 750cfm carburetor
  • Chrome air cleaner
  • MSD Pro-Billet distributor (Requires MSD 6AL Ignition Control)
  • MSD Blaster II coil and bracket
  • Auto-Lite spark plugs
  • Taylor 8mm ignition wires (Color Of Choice Black, Red, Blue, Yellow, Green, Orange No Extra Charge)
  • Water pump
  • Chrome valve covers
  • Chrome breather
  • Flex plate (for auto trans)
  • Engines are photo documented during the building process
  • Each engine is dyno tested, timing set and carburetor adjusted for optimum performance
  • We video tape your live run engine and send you a copy
  • All of our turnkey engines come with a 2 year unlimited mileage warranty

Only $8,700

 

We Are Constantly Running Engine Deals

Please Call Us For The Most Up To Date Pricing

Or E-Mail Us For More Information!

         

Customize Your Crate Engine

March Performance
Alternator
Turn-Key Drop In Rady Small Block Chevy 350 420HP With March ALT Pulley Kit		 Alternator, Power Steering
 Alternator, Power Steering,  And AC
Upgrade $950 Upgrade $1,550 Upgrade $1,950
     

Holley Carburetor
(Includes braided fuel line for carburetor)
Holley
Add $350		 MSD Mini High Torque Starter

Add $245
   
MSD 6AL Ignition Control
MSD 6AL 6420
Add $245		 Manual Flywheel
Flywheel
Add $375
   




The Powerjection III is an amazing accomplishment in engineering. It is by far the simplest and cleanest aftermarket EFI system available. Which also means it is the easiest to install and tune. The “Adaptive Learning” feature eliminates the necessity for laptop programming and tuning, except on the most radical engines.


Powerjection III EFI System

Kit Includes:

  • 750 CFM Throttle Body Assembly (An exact swap for a 4150 Holley)
  • (4) 62 lb./hr. port style injectors
  • Built in EMS (Engine Management System) Mounted on the throttle body
  • Dashboard Software CD with comprehensive Instruction Manual
  • All harnesses and connectors (Much less harnessing than other systems)
  • Idle Air Control - Built in to the throttle body 
  • Coolant Temperature Sensor - 3/8-NPT threads for most manifolds
  • Throttle Position Sensor
  • Wideband O2 Sensor and cable (Many competitive units are narrowband)

Add $2,100


Custom Paint

Custom Painted Engine:

  • Have a custom painted car?  Why not have a custom painted engine?  Give us your paint code and we'll do the rest.

Add $300


Webber 48mm Stack Induction

Webber Stack Induction:

  • Webber Stack Induction Aluminum Intake Manifold
  • Webber 48mm IDA Carburetors
  • Chrome Stacks
  • Webber Carburetor Fuel Line
  • Webber Carburetor Throttle Linkage

Add $ Call

Chevy 350-475hp

Edelbrock Dual Quad's:

  • Performer RPM Dual Quad Air-Gap intake With EnduraShine Finish
  • 2 Thunder Series AVS carburetors With EnduraShine Finish
  • Progressive throttle linkage
  • Fuel line
  • Edelbrock Chrome Dual Carburetor Air Cleaner

Add $1,300


Chevy Black Out Kit

Old School Look:

  • One of the most popular and durable dress-up kits available today! This black crinkle kit with its distinctive look and boldly striking wording comes with everything you need for race day or show day!

Add $225

TH350 Transmission

Automatic Transmission Package's:

  • The world’s finest transmission packages, custom made for Proformance Unlimited.
    Each Transmission Package is tailored to your engine, and Test Driven to ensure maximum performance.
    They build them from Mild to Wild, if you’ve got the horsepower, they have the transmission.

TH-350 Or TH-400 Add $1,800

700R4 Or 200R4 Add $2,650


Whether your vehicle is a hot rod, street car, race car, or even a tow truck, here at Proformance Unlimited we are here to help design and build the combination that best suits your vehicles needs. Please browse our engine combinations listed below or custom design one of your own. Proformance Unlimited is best known for our precision custom designs. From that special built stroker engine to that turn-key drop in ready crate engines, call Doug or Steve and we will be happy to answer any of your questions.

All engines are custom built to order for total customer satisfaction

Credit cards accepted

Call us today for a quote

1-732-462-7283

500HP Short Block

  

500HP Almost Complete

 8500   Updated 1/19/2012

Copyright © 2011 Proformance Unlimited Inc.

Web Authoring by Oger's Web Design
PROFORMANCE UNLIMITED INC. RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR TO MAKE ADDITIONS TO OR IMPROVEMENTS UPON ANY OF ITS PRODUCTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION WHATSOEVER TO INSTALL THE SAME OR IMPROVEMENT UPON PRODUCTS PREVIOUSLY MANUFACTURED. OCCASIONALLY DEPENDING ON AVAILABILITY, PARTS MAY BE SUBSTITUTED THAT WILL NOT EFFECT PRICE, PERFORMANCE, APPEARANCE OR QUALITY OF THE PRODUCT.